Ground Reinforcement

The Flex MSE Vegetated Wall System is a simple, innovative solution for erosion control, slope stability, soil retention and earth wall applications.

Please note this is a system that cannot be ordered on our website and is POA only due to the nature of the product. 
For more information, please call our team on 0800600789 or click the REQUEST QUOTE button below.

The Flex MSE Vegetated Wall System is the ideal solution for walls and slopes where a natural 'green' solution is desired. It is the only system on the market that can deliver both environmental protection and restoration.

The Flex MSE Vegetated Wall System provides solutions to:

Now available in New Zealand, the Flex MSE Vegetated Wall System has been implemented very successfully across North America, Europe and Asia to provide a vegetated face for slopes and walls in erosion control, slope repair, river bank protection and earth retention applications and more.


The Flex MSE Vegetated Wall System improves practices involving bag work construction by combining an innovative and patented interlocking plate with a vegetation sustainable GTX soil bag.


The Flex MSE Connector plate is placed between sand/soil filled Flex MSE GTX bags to dramatically increase the strength of the bag structure. The result is an engineered permanent interlocking soil mass that promotes and sustains vegetation.
 

The Flex MSE Vegetated Wall System has following benefits:

ACEGrid® is a high performance geogrid which is engineered for applications of short term and long term soil reinforcement. The product is woven in with strength in both the roll length direction and in the cross roll direction. In applications of soil reinforcement, the use of ACEGrid® engineered geogrid allows significant tensile strength to be imparted to soils. ACEGrid® is suitable for use in normal occurring soil types, for design lives in excess of 120 years.

 

ACEGrid® is suitable for use in the design of the Flex MSE® Vegetated Wall System.

 

Benefits

TerraPave porous paving grids are an interlocking cellular paving system reinforcing grass or gravel in areas of high traffic or hard stand areas. They are made of are made of recycled plastic and installed with either a grass or gravel filled surface and provide a durable, environmentally friendly reinforced surface able to cope with extremely heavy loads.

Applications:

• Car and Bus Coach Parks (Grass and Gravel)
• Emergency and Heavy Vehicle Access Roads
• Aircraft Taxiways and Helipads
• Walkways and Disabled Routes
• Golf Buggy Paths
• Driveways and Residential Parking

Features/Benefits:

• Allow load bearing up to 150 t/m2
• Manufactured from 100% recycled PE
• Tested in accordance with ASTM D1621-10
• Environmentally friendly, aesthetically pleasing and free draining natural grass or gravel surface
• Porous pavers minimises water runoff
• 27mm ground spikes eliminates slipping and sideways movement
• Reset wells hold moisture and stimulate grass root growth

PRODUCT	TERRAPAVE
Material	Recycled PE ( free from heavy metals)
Colour Options	BLACK
Paver dimensions	500 x 500 x 40 mm (0.25 of a m²)
Height/Diameter	40mm
Weight (Nominal)	0.9kg ± 7 %
Maximum Load Bearing Capacity	150t/m² (filled and compacted)
Chemical resistance	Applicable to: road salt, ammonia, alcohol, oil, gasoline, acid rain, frost
Estimated Life Span	20 Years
Service Temperature	-50°C to 90°C
Environmental Impact	Neutral

 

Prices listed below are per 4 pieces.

GrassInforce is an improved heavy duty thick polyethylene mesh for reinforcing grassed surfaces. Protects surface from rutting or vehicle wheel damage. Installation is simple as edges are butted together and secured with pins rather than creating an overlap.

Please note we do not install this product so if you need to be directed to an installer, please call us on 0800600789 and we will be happy to help.

Available weight:
Heavy - 14mm thickness, 2.0kg/m2
 

Applications

Features/Benefits

GrassInforce Pins

These pins are designed for securing GrassInforce mesh to the ground.

All outer edges of the mesh will require pins at 300-350mm centres. Pins in the middle should be at 500-750mm centres. Allow approximately 5 pins per square metre when ordering.
 

Prices below are per pack of 50.